BPC-157 TB-500 Dosage Calculator: Blend Vials to Syringe Units

REVIEWED BY

Marcus Reinhardt — Chemical Researcher, Lead Analyst & Peptide Research Advisor

Marcus Reinhardt is a chemical researcher specializing in sustainable materials and advanced formulation science, with research experience in compound development and health optimization. He reviews all Peptide Insider educational content for scientific accuracy, strength of supporting evidence, and practical relevance. Editorial team.

BPC-157 TB-500 blend dosage calculator: reconstitution and insulin-syringe units converter

Written by Marcus Reinhardt · Lead Analyst, Peptide Insider · LinkedIn

Evidence-first peptide coverage — every claim on this page is linked to its primary source and reviewed against our editorial policy

Citations verified against PubMed · Published: 2026-09-07 · Last updated: 2026-09-07

BPC-157 and TB-500 are most often sold together as the Wolverine stack: one lyophilized vial labelled with a combined weight, typically 10 mg as 5 mg of each. A milligram of blend is half a milligram of each compound, and that is where the arithmetic goes wrong. This BPC-157 TB-500 dosage calculator converts the vial total and the water you add into a concentration, converts an amount you choose into insulin-syringe units, and splits every figure by the label ratio so you can see how much BPC-157 and how much TB-500 a draw contains.

WHAT THIS TOOL IS, AND IS NOT

It converts the vial size and water volume you enter into a concentration, and converts an amount you choose into insulin-syringe units. Nothing is pre-filled as a dose and nothing on this page recommends one. Neither compound has a subcutaneous human trial and the blend has never been studied at all, so the human data summarised below are context only.

How the BPC-157 / TB-500 blends math works

Three steps, and every peptide calculator uses the same three. First, concentration: milligrams in the vial divided by millilitres of bacteriostatic water added gives mg/mL. A 10 mg vial with 2 mL of water is 5 mg/mL. Second, what one syringe unit holds: a U-100 insulin syringe has 100 units per millilitre, so one unit is 0.01 mL, and the amount in one unit is the concentration divided by 100 (in mg) or multiplied by 10 (in mcg). At 5 mg/mL, one unit holds 50 mcg. Third, units to draw: the amount you chose, in mcg, divided by the mcg in one unit.

Two practical consequences fall out of that arithmetic. Adding more water lowers the concentration, so any given amount becomes more units and is easier to read on the syringe; adding less water does the opposite and can push an amount below two units, where the markings stop being precise. And the vial’s total content sets a hard ceiling: it does not matter how it is diluted, a 10 mg vial only ever contains 10 mg.

BPC-157 / TB-500 reconstitution chart

The same arithmetic laid out for the total labelled content of a blend vial, at one, two and three millilitres of bacteriostatic water; the calculator above splits each figure by the label ratio. “Per unit” is one mark on a U-100 insulin syringe; “per 10 units” is 0.1 mL. These are conversions, not doses.

VialWater addedConcentrationPer unitPer 10 units
10 mg1 mL10 mg/mL100 mcg1,000 mcg
10 mg2 mL5 mg/mL50 mcg500 mcg
10 mg3 mL3.333 mg/mL33.33 mcg333.3 mcg
20 mg1 mL20 mg/mL200 mcg2,000 mcg
20 mg2 mL10 mg/mL100 mcg1,000 mcg
20 mg3 mL6.667 mg/mL66.67 mcg666.7 mcg

Table values are exact arithmetic (mg ÷ mL; mcg per unit = mg/mL × 10). They assume the vial label is accurate, which for research-market products is only established by a batch-matched certificate of analysis.

Neither half of the blend has a human dosing trial

The BPC-157 / TB-500 blend, sold as the Wolverine stack, is a fixed-ratio vial of two compounds that have never been tested together and have almost no human data apart.

BPC-157 has no randomised human trial. The entire published human record, as of this writing, is two small uncontrolled pilot reports from a single private clinic, both in Alternative Therapies in Health and Medicine, and neither used the subcutaneous route that research-market vials are sold for:

ReportParticipantsWhat was givenResult as reportedSource
Lee & Burgess 20252 adults (aged 58 and 68) who had received intravenous BPC-157 before10 mg in 250 mL saline infused over one hour on day 1; 20 mg the same way on day 2No measurable change in heart, liver, kidney, thyroid or glucose markers; no side effects reportedPMID 40131143
Lee, Walker & Ayadi 202412 women with interstitial cystitis unresponsive to pentosan polysulfate10 mg total injected around the bladder inflammation during a single cystoscopy10 of 12 reported complete symptom resolution, 2 of 12 reported 80%; no adverse eventsPMID 39325560

Two participants and twelve participants, no control groups, no blinding, intravenous and intravesical routes: this is the evidence that every “BPC-157 dosing protocol” online sits on top of. The animal literature is large, but rodent doses do not convert to human ones by body weight, and BPC-157 has no human pharmacokinetics from which a subcutaneous amount could be derived.

TB-500 has never been administered to humans in a published trial. The only human dosing data belong to full-length thymosin β4, given intravenously to healthy volunteers: synthetic Tβ4 at 42 to 1,260 mg single then daily for 14 days (PMID 20536472) and recombinant Tβ4 at 0.05 to 25 µg/kg (PMID 34346165), two programmes that disagree by more than four orders of magnitude for a molecule that is not TB-500. The TB-500 dosage calculator sets that out in full.

The Wolverine stack guide covers what each component does in animal and cell studies and what a blended certificate of analysis must show.

Reconstitution notes that change the numbers

Bacteriostatic water, not sterile water, for multi-draw vials. Bacteriostatic water contains 0.9% benzyl alcohol, which is what allows a reconstituted vial to be entered more than once; sterile water has no preservative. Our bacteriostatic water guide covers the label facts.

Volume added is the number that matters, not the vial’s stated capacity. If you add 2 mL, the concentration uses 2 mL regardless of whether the water vial says 10 mL or 30 mL. Measure the water with the same insulin syringe you will draw with, since 100 units is 1 mL.

Lyophilized powder adds a negligible volume. A few milligrams of peptide dissolved in millilitres of water does not change the volume in a way an insulin syringe can resolve, which is why every calculator, including this one, ignores it.

Label accuracy is the biggest error term. A vial labelled 10 mg that assays at 80% of label contains 8 mg of the stated compound, and every number above shifts with it. This is why a recent, batch-matched third-party certificate of analysis is the minimum standard on Peptide Insider, and why we publish how to read one.

Frequently asked questions

Does this calculator recommend a BPC-157 TB-500 dose?

No. The amount field stays blank until you type into it. The calculator converts the vial total and water you enter into a concentration, converts an amount you choose into syringe units, and shows how that amount splits between BPC-157 and TB-500 by the label ratio. The human data described on this page are two tiny BPC-157 pilot reports and intravenous thymosin beta-4 trials, and are context rather than a recommendation.

How many units is 1 mg of a BPC-157 TB-500 blend?

It depends on the concentration. As arithmetic only: a 10 mg blend vial in 2 mL is 5 mg/mL, so 1 mg of blend is 0.2 mL, which is 20 units on a U-100 insulin syringe, and in a 5 mg + 5 mg vial that draw holds 0.5 mg of BPC-157 and 0.5 mg of TB-500. Enter your own vial, water and amount above to see your figures.

What if my Wolverine vial is 20 mg?

Enter 20 in the vial field; the calculator handles any total. A 20 mg vial in 2 mL is 10 mg/mL, so every unit holds 100 mcg of blend, 50 mcg of each compound at a 1:1 ratio, and the concentration warning will point out that this is a strong mix that leaves little room for measuring error.

Does the blend ratio matter for the calculator?

Only for the per-compound split line. The total-blend figures (concentration, mcg per unit, units to draw) are correct for any ratio. The split assumes 1:1, which is how the blend is usually labelled; if your certificate of analysis shows a different ratio, scale the per-compound figures to match.

Why not use the single BPC-157 or TB-500 calculators?

You can, by entering the milligrams of one compound from the label rather than the vial total, and the units you draw will carry the other compound in proportion. This page saves that step by showing both compounds at once and by keeping the blend-specific caveats, above all that the two have never been studied together, next to the numbers.

Which syringe size should I select?

The one you actually have. The 30, 50 and 100 options are all U-100 insulin syringes, so one unit is 0.01 mL on each; the setting only changes the capacity ceiling and the drawing. The calculator warns when an amount exceeds the selected syringe or falls below two units, where the markings stop being precise.